UE Ultrasonic Leak Detector Ultraprobe 3000 (23009) Due 5/3/2024

In the scanning mode, this ultrasonic leak detector picks up airborne ultrasounds emitted by pressure/vacuum leaks and electrical discharges; the field of reception can be focused with the rubber focusing probe. With the provided stethoscope (contact) module, the detector picks up ultrasound that is generated internally such as within a pipe, bearing housing, or steam trap. With extensions, the probe can reach up to 37”.  The display panel shows the sound intensity level as both a numeric decibel value and a bar graph. The headset is designed for use with hard hats. It blocks out intense external sounds, allowing the user to more easily hear the sounds received by the Ultraprobe.

Sensitivity can be adjusted with the sensitivity control dial and the warble tone generator provides a strong, recognizable “Warble” signal that can be used for sensitivity validation. The rechargeable battery provides 2 hours of continuous run time. The Ultraprobe can store up to 400 readings that can be downloaded to your computer using the provided USB cable.

The Ultraprobe receives ultrasound centered around 40 kHz and is not adjustable.

Use the LeakSurvey App by UE Systems to prepare leak survey reports including pictures of leak locations, estimated CFM losses, and cost avoidance.